diff --git a/home/.config/dunst/dunstrc b/home/.config/dunst/dunstrc new file mode 100644 index 0000000..e2ec312 --- /dev/null +++ b/home/.config/dunst/dunstrc @@ -0,0 +1,414 @@ +[global] + ### Display ### + + # Which monitor should the notifications be displayed on. + monitor = 0 + + # Display notification on focused monitor. Possible modes are: + # mouse: follow mouse pointer + # keyboard: follow window with keyboard focus + # none: don't follow anything + # + # "keyboard" needs a window manager that exports the + # _NET_ACTIVE_WINDOW property. + # This should be the case for almost all modern window managers. + # + # If this option is set to mouse or keyboard, the monitor option + # will be ignored. + follow = mouse + + # The geometry of the window: + # [{width}]x{height}[+/-{x}+/-{y}] + # The geometry of the message window. + # The height is measured in number of notifications everything else + # in pixels. If the width is omitted but the height is given + # ("-geometry x2"), the message window expands over the whole screen + # (dmenu-like). If width is 0, the window expands to the longest + # message displayed. A positive x is measured from the left, a + # negative from the right side of the screen. Y is measured from + # the top and down respectively. + # The width can be negative. In this case the actual width is the + # screen width minus the width defined in within the geometry option. + geometry = "300x5-30+20" + + # Show how many messages are currently hidden (because of geometry). + indicate_hidden = yes + + # Shrink window if it's smaller than the width. Will be ignored if + # width is 0. + shrink = no + + # The transparency of the window. Range: [0; 100]. + # This option will only work if a compositing window manager is + # present (e.g. xcompmgr, compiz, etc.). + transparency = 0 + + # The height of the entire notification. If the height is smaller + # than the font height and padding combined, it will be raised + # to the font height and padding. + notification_height = 0 + + # Draw a line of "separator_height" pixel height between two + # notifications. + # Set to 0 to disable. + separator_height = 2 + + # Padding between text and separator. + padding = 8 + + # Horizontal padding. + horizontal_padding = 8 + + # Defines width in pixels of frame around the notification window. + # Set to 0 to disable. + frame_width = 3 + + # Defines color of the frame around the notification window. + frame_color = "#aaaaaa" + + # Define a color for the separator. + # possible values are: + # * auto: dunst tries to find a color fitting to the background; + # * foreground: use the same color as the foreground; + # * frame: use the same color as the frame; + # * anything else will be interpreted as a X color. + separator_color = frame + + # Sort messages by urgency. + sort = yes + + # Don't remove messages, if the user is idle (no mouse or keyboard input) + # for longer than idle_threshold seconds. + # Set to 0 to disable. + # A client can set the 'transient' hint to bypass this. See the rules + # section for how to disable this if necessary + idle_threshold = 120 + + ### Text ### + + font = Monospace 8 + + # The spacing between lines. If the height is smaller than the + # font height, it will get raised to the font height. + line_height = 0 + + # Possible values are: + # full: Allow a small subset of html markup in notifications: + # bold + # italic + # strikethrough + # underline + # + # For a complete reference see + # . + # + # strip: This setting is provided for compatibility with some broken + # clients that send markup even though it's not enabled on the + # server. Dunst will try to strip the markup but the parsing is + # simplistic so using this option outside of matching rules for + # specific applications *IS GREATLY DISCOURAGED*. + # + # no: Disable markup parsing, incoming notifications will be treated as + # plain text. Dunst will not advertise that it has the body-markup + # capability if this is set as a global setting. + # + # It's important to note that markup inside the format option will be parsed + # regardless of what this is set to. + markup = full + + # The format of the message. Possible variables are: + # %a appname + # %s summary + # %b body + # %i iconname (including its path) + # %I iconname (without its path) + # %p progress value if set ([ 0%] to [100%]) or nothing + # %n progress value if set without any extra characters + # %% Literal % + # Markup is allowed + format = "%s\n%b" + + # Alignment of message text. + # Possible values are "left", "center" and "right". + alignment = left + + # Show age of message if message is older than show_age_threshold + # seconds. + # Set to -1 to disable. + show_age_threshold = 60 + + # Split notifications into multiple lines if they don't fit into + # geometry. + word_wrap = yes + + # When word_wrap is set to no, specify where to make an ellipsis in long lines. + # Possible values are "start", "middle" and "end". + ellipsize = middle + + # Ignore newlines '\n' in notifications. + ignore_newline = no + + # Stack together notifications with the same content + stack_duplicates = true + + # Hide the count of stacked notifications with the same content + hide_duplicate_count = false + + # Display indicators for URLs (U) and actions (A). + show_indicators = yes + + ### Icons ### + + # Align icons left/right/off + icon_position = off + + # Scale larger icons down to this size, set to 0 to disable + max_icon_size = 32 + + # Paths to default icons. + icon_path = /usr/share/icons/gnome/16x16/status/:/usr/share/icons/gnome/16x16/devices/ + + ### History ### + + # Should a notification popped up from history be sticky or timeout + # as if it would normally do. + sticky_history = yes + + # Maximum amount of notifications kept in history + history_length = 20 + + ### Misc/Advanced ### + + # dmenu path. + dmenu = /usr/bin/dmenu -p dunst: + + # Browser for opening urls in context menu. + browser = /usr/bin/sensible-browser + + # Always run rule-defined scripts, even if the notification is suppressed + always_run_script = true + + # Define the title of the windows spawned by dunst + title = Dunst + + # Define the class of the windows spawned by dunst + class = Dunst + + # Print a notification on startup. + # This is mainly for error detection, since dbus (re-)starts dunst + # automatically after a crash. + startup_notification = false + + # Manage dunst's desire for talking + # Can be one of the following values: + # crit: Critical features. Dunst aborts + # warn: Only non-fatal warnings + # mesg: Important Messages + # info: all unimportant stuff + # debug: all less than unimportant stuff + verbosity = mesg + + # Define the corner radius of the notification window + # in pixel size. If the radius is 0, you have no rounded + # corners. + # The radius will be automatically lowered if it exceeds half of the + # notification height to avoid clipping text and/or icons. + corner_radius = 0 + + ### Legacy + + # Use the Xinerama extension instead of RandR for multi-monitor support. + # This setting is provided for compatibility with older nVidia drivers that + # do not support RandR and using it on systems that support RandR is highly + # discouraged. + # + # By enabling this setting dunst will not be able to detect when a monitor + # is connected or disconnected which might break follow mode if the screen + # layout changes. + force_xinerama = false + + ### mouse + + # Defines action of mouse event + # Possible values are: + # * none: Don't do anything. + # * do_action: If the notification has exactly one action, or one is marked as default, + # invoke it. If there are multiple and no default, open the context menu. + # * close_current: Close current notification. + # * close_all: Close all notifications. + mouse_left_click = close_current + mouse_middle_click = do_action + mouse_right_click = close_all + +# Experimental features that may or may not work correctly. Do not expect them +# to have a consistent behaviour across releases. +[experimental] + # Calculate the dpi to use on a per-monitor basis. + # If this setting is enabled the Xft.dpi value will be ignored and instead + # dunst will attempt to calculate an appropriate dpi value for each monitor + # using the resolution and physical size. This might be useful in setups + # where there are multiple screens with very different dpi values. + per_monitor_dpi = false + +[shortcuts] + + # Shortcuts are specified as [modifier+][modifier+]...key + # Available modifiers are "ctrl", "mod1" (the alt-key), "mod2", + # "mod3" and "mod4" (windows-key). + # Xev might be helpful to find names for keys. + + # Close notification. + #close = ctrl+space + + # Close all notifications. + #close_all = ctrl+shift+space + + # Redisplay last message(s). + # On the US keyboard layout "grave" is normally above TAB and left + # of "1". Make sure this key actually exists on your keyboard layout, + # e.g. check output of 'xmodmap -pke' + #history = ctrl+grave + + # Context menu. + #context = ctrl+shift+period + +[urgency_low] + # IMPORTANT: colors have to be defined in quotation marks. + # Otherwise the "#" and following would be interpreted as a comment. + background = "#222222" + foreground = "#888888" + timeout = 10 + # Icon for notifications with low urgency, uncomment to enable + #icon = /path/to/icon + +[urgency_normal] + background = "#285577" + foreground = "#ffffff" + timeout = 10 + # Icon for notifications with normal urgency, uncomment to enable + #icon = /path/to/icon + +[urgency_critical] + background = "#900000" + foreground = "#ffffff" + frame_color = "#ff0000" + timeout = 0 + # Icon for notifications with critical urgency, uncomment to enable + #icon = /path/to/icon + +# Every section that isn't one of the above is interpreted as a rules to +# override settings for certain messages. +# +# Messages can be matched by +# appname (discouraged, see desktop_entry) +# body +# category +# desktop_entry +# icon +# match_transient +# msg_urgency +# stack_tag +# summary +# +# and you can override the +# background +# foreground +# format +# frame_color +# fullscreen +# new_icon +# set_stack_tag +# set_transient +# timeout +# urgency +# +# Shell-like globbing will get expanded. +# +# Instead of the appname filter, it's recommended to use the desktop_entry filter. +# GLib based applications export their desktop-entry name. In comparison to the appname, +# the desktop-entry won't get localized. +# +# SCRIPTING +# You can specify a script that gets run when the rule matches by +# setting the "script" option. +# The script will be called as follows: +# script appname summary body icon urgency +# where urgency can be "LOW", "NORMAL" or "CRITICAL". +# +# NOTE: if you don't want a notification to be displayed, set the format +# to "". +# NOTE: It might be helpful to run dunst -print in a terminal in order +# to find fitting options for rules. + +# Disable the transient hint so that idle_threshold cannot be bypassed from the +# client +#[transient_disable] +# match_transient = yes +# set_transient = no +# +# Make the handling of transient notifications more strict by making them not +# be placed in history. +#[transient_history_ignore] +# match_transient = yes +# history_ignore = yes + +# fullscreen values +# show: show the notifications, regardless if there is a fullscreen window opened +# delay: displays the new notification, if there is no fullscreen window active +# If the notification is already drawn, it won't get undrawn. +# pushback: same as delay, but when switching into fullscreen, the notification will get +# withdrawn from screen again and will get delayed like a new notification +#[fullscreen_delay_everything] +# fullscreen = delay +#[fullscreen_show_critical] +# msg_urgency = critical +# fullscreen = show + +#[espeak] +# summary = "*" +# script = dunst_espeak.sh + +#[script-test] +# summary = "*script*" +# script = dunst_test.sh + +#[ignore] +# # This notification will not be displayed +# summary = "foobar" +# format = "" + +#[history-ignore] +# # This notification will not be saved in history +# summary = "foobar" +# history_ignore = yes + +#[skip-display] +# # This notification will not be displayed, but will be included in the history +# summary = "foobar" +# skip_display = yes + +#[signed_on] +# appname = Pidgin +# summary = "*signed on*" +# urgency = low +# +#[signed_off] +# appname = Pidgin +# summary = *signed off* +# urgency = low +# +#[says] +# appname = Pidgin +# summary = *says* +# urgency = critical +# +#[twitter] +# appname = Pidgin +# summary = *twitter.com* +# urgency = normal +# +#[stack-volumes] +# appname = "some_volume_notifiers" +# set_stack_tag = "volume" +# +# vim: ft=cfg diff --git a/home/.config/i3/config b/home/.config/i3/config new file mode 100644 index 0000000..4061d29 --- /dev/null +++ b/home/.config/i3/config @@ -0,0 +1,185 @@ +# i3 config file (v4) +# +# Please see https://i3wm.org/docs/userguide.html for a complete reference! +# +### Startup +exec_always --no-startup-id autotiling +exec_always --no-startup-id flock -n ~/.polybar.lock polybar mybar +exec --no-startup-id watch -n 15 autorandr --change +exec --no-startup-id dunst +exec --no-startup-id keepassxc +exec --no-startup-id nm-applet +exec --no-startup-id blueman-applet + +set $mod Mod4 + +# Font for window titles. Will also be used by the bar unless a different font +# is used in the bar {} block below. +font pango:Source Code Pro 11px + +### Window display +# don't show the title bar on the window +default_border none + +### Screenshots +bindsym --release Print exec scrot ~/'Pictures/%Y-%m-%d-%H:%M:%S.png' +bindsym --release Ctrl+Print exec scrot -e 'xclip -selection clipboard -in -t image/png $f' /tmp/scrot-tmp.png +bindsym --release Shift+Print exec scrot -s ~/'Pictures/%Y-%m-%d-%H:%M:%S.png' +bindsym --release Ctrl+Shift+Print exec scrot -s -e 'xclip -selection clipboard -in -t image/png $f' /tmp/scrot-tmp.png + +# xss-lock grabs a logind suspend inhibit lock and will use i3lock to lock the +# screen before suspend. Use loginctl lock-session to lock your screen. +exec --no-startup-id xss-lock --transfer-sleep-lock -- i3lock -c 000000 --nofork + + +# Use pactl to adjust volume in PulseAudio. +set $refresh_i3status killall -SIGUSR1 i3status +bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ +5% +bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume @DEFAULT_SINK@ -5% +bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute @DEFAULT_SINK@ toggle +bindsym XF86AudioMicMute exec --no-startup-id pactl set-source-mute @DEFAULT_SOURCE@ toggle +bindsym XF86MonBrightnessDown exec brightnessctl set 5%- +bindsym XF86MonBrightnessUp exec brightnessctl set +5% +bindsym XF86AudioPlay exec playerctl play-pause +bindsym XF86AudioNext exec playerctl next +bindsym XF86AudioPrev exec playerctl previous +bindsym XF86Display exec arandr + +# Use Mouse+$mod to drag floating windows to their wanted position +floating_modifier $mod + +# start a terminal +bindsym $mod+Return exec alacritty + +# kill focused window +bindsym $mod+Shift+q kill + +# start dmenu (a program launcher) +#bindsym $mod+d exec --no-startup-id dmenu_run +bindsym $mod+d exec --no-startup-id rofi -show combi -run-shell-command 'alacritty -e zsh -ic "{cmd} && read"' +# A more modern dmenu replacement is rofi: +# bindcode $mod+40 exec "rofi -modi drun,run -show drun" +# There also is i3-dmenu-desktop which only displays applications shipping a +# .desktop file. It is a wrapper around dmenu, so you need that installed. +# bindcode $mod+40 exec --no-startup-id i3-dmenu-desktop + +# change focus +bindsym $mod+h focus left +bindsym $mod+j focus down +bindsym $mod+k focus up +bindsym $mod+l focus right + +# alternatively, you can use the cursor keys: +bindsym $mod+Left focus left +bindsym $mod+Down focus down +bindsym $mod+Up focus up +bindsym $mod+Right focus right + +# move focused window +bindsym $mod+Shift+h move left +bindsym $mod+Shift+j move down +bindsym $mod+Shift+k move up +bindsym $mod+Shift+l move right + +# alternatively, you can use the cursor keys: +bindsym $mod+Shift+Left move left +bindsym $mod+Shift+Down move down +bindsym $mod+Shift+Up move up +bindsym $mod+Shift+Right move right + +# split in horizontal orientation +bindsym $mod+b split h + +# split in vertical orientation +bindsym $mod+v split v + +# enter fullscreen mode for the focused container +bindsym $mod+f fullscreen toggle + +# change container layout (stacked, tabbed, toggle split) +bindsym $mod+s layout stacking +bindsym $mod+w layout tabbed +bindsym $mod+e layout toggle split + +# toggle tiling / floating +bindsym $mod+Shift+space floating toggle + +# change focus between tiling / floating windows +bindsym $mod+space focus mode_toggle + +# focus the parent container +bindsym $mod+a focus parent + +# focus the child container +#bindsym $mod+d focus child + +# Define names for default workspaces for which we configure key bindings later on. +# We use variables to avoid repeating the names in multiple places. +set $ws1 "1" +set $ws2 "2" +set $ws3 "3" +set $ws4 "4" +set $ws5 "5" +set $ws6 "6" +set $ws7 "7" +set $ws8 "8" +set $ws9 "9" +set $ws10 "10" + +# switch to workspace +bindsym $mod+1 workspace number $ws1 +bindsym $mod+2 workspace number $ws2 +bindsym $mod+3 workspace number $ws3 +bindsym $mod+4 workspace number $ws4 +bindsym $mod+5 workspace number $ws5 +bindsym $mod+6 workspace number $ws6 +bindsym $mod+7 workspace number $ws7 +bindsym $mod+8 workspace number $ws8 +bindsym $mod+9 workspace number $ws9 +bindsym $mod+0 workspace number $ws10 + +# move focused container to workspace +bindsym $mod+Shift+1 move container to workspace number $ws1 +bindsym $mod+Shift+2 move container to workspace number $ws2 +bindsym $mod+Shift+3 move container to workspace number $ws3 +bindsym $mod+Shift+4 move container to workspace number $ws4 +bindsym $mod+Shift+5 move container to workspace number $ws5 +bindsym $mod+Shift+6 move container to workspace number $ws6 +bindsym $mod+Shift+7 move container to workspace number $ws7 +bindsym $mod+Shift+8 move container to workspace number $ws8 +bindsym $mod+Shift+9 move container to workspace number $ws9 +bindsym $mod+Shift+0 move container to workspace number $ws10 + +# reload the configuration file +bindsym $mod+Shift+c reload +# restart i3 inplace (preserves your layout/session, can be used to upgrade i3) +bindsym $mod+Shift+r restart +# exit i3 (logs you out of your X session) +bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -B 'Yes, exit i3' 'i3-msg exit'" + +# resize window (you can also use the mouse for that) +mode "resize" { + # These bindings trigger as soon as you enter the resize mode + + # Pressing left will shrink the window’s width. + # Pressing right will grow the window’s width. + # Pressing up will shrink the window’s height. + # Pressing down will grow the window’s height. + bindsym h resize shrink width 10 px or 10 ppt + bindsym j resize grow height 10 px or 10 ppt + bindsym k resize shrink height 10 px or 10 ppt + bindsym l resize grow width 10 px or 10 ppt + + # same bindings, but for the arrow keys + bindsym Left resize shrink width 10 px or 10 ppt + bindsym Down resize grow height 10 px or 10 ppt + bindsym Up resize shrink height 10 px or 10 ppt + bindsym Right resize grow width 10 px or 10 ppt + + # back to normal: Enter or Escape or $mod+r + bindsym Return mode "default" + bindsym Escape mode "default" + bindsym $mod+r mode "default" +} + +bindsym $mod+r mode "resize" diff --git a/home/.config/polybar/config b/home/.config/polybar/config new file mode 100644 index 0000000..59812c9 --- /dev/null +++ b/home/.config/polybar/config @@ -0,0 +1,430 @@ +;========================================================== +; +; +; ██████╗ ██████╗ ██╗ ██╗ ██╗██████╗ █████╗ ██████╗ +; ██╔══██╗██╔═══██╗██║ ╚██╗ ██╔╝██╔══██╗██╔══██╗██╔══██╗ +; ██████╔╝██║ ██║██║ ╚████╔╝ ██████╔╝███████║██████╔╝ +; ██╔═══╝ ██║ ██║██║ ╚██╔╝ ██╔══██╗██╔══██║██╔══██╗ +; ██║ ╚██████╔╝███████╗██║ ██████╔╝██║ ██║██║ ██║ +; ╚═╝ ╚═════╝ ╚══════╝╚═╝ ╚═════╝ ╚═╝ ╚═╝╚═╝ ╚═╝ +; +; +; To learn more about how to configure Polybar +; go to https://github.com/polybar/polybar +; +; The README contains a lot of information +; +;========================================================== + +[colors] +;background = ${xrdb:color0:#222} +background = #222 +background-alt = #444 +;foreground = ${xrdb:color7:#222} +foreground = #dfdfdf +foreground-alt = #555 +primary = #ffb52a +secondary = #e60053 +alert = #bd2c40 + +[bar/mybar] +;monitor = ${env:MONITOR:HDMI-1} +width = 100% +height = 27 +;offset-x = 1% +;offset-y = 1% +radius = 6.0 +fixed-center = false + +background = ${colors.background} +foreground = ${colors.foreground} + +line-size = 3 +line-color = #f00 + +border-size = 4 +border-color = #00000000 + +padding-left = 0 +padding-right = 2 + +module-margin-left = 1 +module-margin-right = 2 + +#font-0 = fixed:pixelsize=10;1 +font-0 = Source Code Pro:style=regular:size=9 +font-1 = Source Code Pro:style=regular:size=9 +font-2 = Source Code Pro:style=regular:size=9 + +modules-left = i3 +modules-center = xwindow +modules-right = filesystem backlight-acpi pulseaudio memory cpu wlan eth battery temperature date powermenu + +tray-position = right +tray-padding = 2 +;tray-background = #0063ff + +;wm-restack = bspwm +;wm-restack = i3 + +;override-redirect = true + +;scroll-up = bspwm-desknext +;scroll-down = bspwm-deskprev + +;scroll-up = i3wm-wsnext +;scroll-down = i3wm-wsprev + +cursor-click = pointer +cursor-scroll = ns-resize + +[module/xwindow] +type = internal/xwindow +label = %title:0:30:...% + +[module/xkeyboard] +type = internal/xkeyboard +blacklist-0 = num lock + +format-prefix = " " +format-prefix-foreground = ${colors.foreground-alt} +format-prefix-underline = ${colors.secondary} + +label-layout = %layout% +label-layout-underline = ${colors.secondary} + +label-indicator-padding = 2 +label-indicator-margin = 1 +label-indicator-background = ${colors.secondary} +label-indicator-underline = ${colors.secondary} + +[module/filesystem] +type = internal/fs +interval = 25 + +mount-0 = / + +label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%% +label-unmounted = %mountpoint% not mounted +label-unmounted-foreground = ${colors.foreground-alt} + +[module/bspwm] +type = internal/bspwm + +label-focused = %index% +label-focused-background = ${colors.background-alt} +label-focused-underline= ${colors.primary} +label-focused-padding = 2 + +label-occupied = %index% +label-occupied-padding = 2 + +label-urgent = %index%! +label-urgent-background = ${colors.alert} +label-urgent-padding = 2 + +label-empty = %index% +label-empty-foreground = ${colors.foreground-alt} +label-empty-padding = 2 + +; Separator in between workspaces +; label-separator = | + +[module/i3] +type = internal/i3 +format = +index-sort = true +wrapping-scroll = false + +; Only show workspaces on the same output as the bar +;pin-workspaces = true + +label-mode-padding = 2 +label-mode-foreground = #000 +label-mode-background = ${colors.primary} + +; focused = Active workspace on focused monitor +label-focused = %index% +label-focused-background = ${colors.background-alt} +label-focused-underline= ${colors.primary} +label-focused-padding = 2 + +; unfocused = Inactive workspace on any monitor +label-unfocused = %index% +label-unfocused-padding = 2 + +; visible = Active workspace on unfocused monitor +label-visible = %index% +label-visible-background = ${self.label-focused-background} +label-visible-underline = ${self.label-focused-underline} +label-visible-padding = ${self.label-focused-padding} + +; urgent = Workspace with urgency hint set +label-urgent = %index% +label-urgent-background = ${colors.alert} +label-urgent-padding = 2 + +; Separator in between workspaces +; label-separator = | + + +[module/mpd] +type = internal/mpd +format-online = + +icon-prev =  +icon-stop =  +icon-play =  +icon-pause =  +icon-next =  + +label-song-maxlen = 25 +label-song-ellipsis = true + +[module/xbacklight] +type = internal/xbacklight + +format =